Instrument Cluster Finish Panel

Instrument Cluster Finish Panel

Removal and Installation

1. Position the steering column in the downward position.

2. Remove the upper instrument panel center finish panel. For additional information, refer to Instrument Panel Finish Panel - Center, Upper Instrument Panel Finish Panel - Center, Upper.

3. Remove the steering column opening trim panel.

4. Remove the 4 instrument cluster finish panel screws.

5. Remove the instrument cluster finish panel.
- If equipped, disconnect the electrical connectors.

6. To install, reverse the removal procedure.
- Make sure to align the trim panel retaining clips to the adjacent retaining clip holes.