Exhaust Gas Recirculation Temperature (EGRT) Sensor - Outlet

Exhaust Gas Recirculation Temperature (EGRT) Sensor - Outlet









Removal and Installation

1. NOTICE: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls or the vehicle may be damaged.

Turn the ignition switch to the OFF position.

2. Disconnect the outlet Exhaust Gas Recirculation Temperature (EGRT) sensor electrical connector.

3. Remove the outlet EGRT sensor.
- To install, tighten to 38 Nm (28 lb-ft).

4. To install, reverse the removal procedure.