Principles Of Operation

Glass, Frames and Mechanisms

Principles of Operation

There are 2 modes of operation for the power window system, manual mode and one-touch down mode.

Manual Mode

When the LH front window control switch is pressed to the 1st detent, the LH front window will move down until one of the following conditions are met:

- The LH front window control switch is released from the 1st detent position
- The LH front window control switch is pushed to the 2nd detent, causing the LF window to enter one-touch down mode

One-Touch Down Mode

The one-touch down feature is activated when the LH window control switch for the LH window is pressed to the 2nd detent.

One-touch down mode will be terminated when any of the following conditions are met:

- The LH window control switch is pulled to the UP position
- The LH window control switch is released (off position) and then pressed to the manual DOWN position (1st detent) or one-touch DOWN position (2nd detent)
- The accessory delay relay is inactive

The one-touch down feature is integral to the LH front window control switch.