Piston - Disassembly And Assembly

Piston













Disassembly and Assembly

1. NOTE: Mark the connecting rod and piston to make sure correct orientation on reassembly.

Remove the 2 piston pin retainers.

2. NOTE: The piston pins are a floating type piston pin and should not require a press to remove or install them.

Remove the connecting rod.

- Remove the piston pin.

- Remove the connecting rod.

3. To assemble, reverse the disassembly procedure.
- Lubricate the connecting rod piston pin bore, piston pin bore and piston pin with clean engine oil prior to assembly.