Harmonic Balancer - Crankshaft Pulley

Crankshaft Pulley

NOTICE: To prevent engine damage, always install 4 new bolts when installing the vibration damper.

NOTE: Apply a light coat of engine oil to the bolts prior to installing the bolts.

NOTE: Use the Strap Wrench to prevent the engine from turning during the tightening of the bolts.

Position the crankshaft pulley and install 4 new bolts in 2 stages, in the sequence shown.

- Stage 1: Tighten to 68 Nm (50 lb-ft).

- Stage 2: Tighten an additional 90 degrees.