Intermediate Housing

Intermediate Housing









Disassembly

1. Using a brass drift, remove the intermediate housing countershaft bearing race.





2. Using a brass drift, remove the intermediate housing mainshaft bearing race.





3. Using the Slide Hammer with the Actuator Pin and a 3/4 to 7/8 inch Collet, remove and discard the center shift rail bearing.





Assembly

1. Using the Countershaft Bearing Cup Installer and the Handle, install the intermediate housing countershaft bearing race.
- Using the Heat Gun, heat the bearing area of the housing.





2. Using the Centerplate Mainshaft Bearing Cup Installer and the Handle, install the intermediate housing mainshaft bearing race.
- Using the Heat Gun, heat the bearing area of the housing.





3. Using the Shift Rail Needle Bearing Installer and the Handle, install the center rail shift bearing.
- Using the Heat Gun, heat the bearing area of the housing.