Seats: Description and Operation

Seats


Front Seats

The front 40 percent bucket seats and 60 percent driver seat are equipped with the following serviceable components:

- Armrest assembly (60 percent driver seat)
- Adjustable head restraints
- Head restraint guide sleeves
- Backrest frames
- Backrest/cushion foam pads and covers
- Recliner handles
- Seat side air bags
- Cushion side shields
- Occupant Classification Sensor (OCS) system (passenger seat cushion)
- Safety belt buckle and pretensioner assemblies
- Seat position sensor (driver seat track)
- Cushion frames
- Seat tracks


Seat Side Air Bags

Driver and passenger seat side air bags are attached to the seat backrest frame. For diagnostic information, or if the seat side air bag has deployed, refer to the appropriate procedure in Restraint Systems.


Occupant Classification Sensor (OCS)

NOTE: OCS system components (seat cushion foam pad, bladder with pressure sensor and Occupant Classification System Module (OCSM)) are calibrated to each other and are serviced as an assembly. If new OCS system components are needed, an OCS system service kit must be installed as an assembly.

The OCS system is standard equipment on all front passenger seats. For information on diagnosing or servicing the OCS system, refer to the appropriate procedure in Restraint Systems.


Rear Seats

Second Row Seating

SuperCab (2- and 4-door) are equipped with center-facing rear seats. The rear seats are serviced as assemblies. Only the trim coverings are serviceable.