Engine System - General Information

Engine

NOTICE: When repairing engines, all parts must be contamination free. If contamination/foreign material is present when repairing an engine, premature engine failure may occur.

NOTE: This system contains information, steps and procedures that may not be specific to your engine.

NOTE: If a component fails to meet the specifications, repair or install a new component as necessary.

NOTE: Refer to the appropriate Engine for the specification.

This system covers general procedures and diagnosis and testing of the engine system, except for exhaust emission control devices, the diagnosis of which are covered in Computers and Control Systems Information.

The engine incorporates the following features:

- a closed PCV system. For service, refer to Emission Control Systems.
- an exhaust emission control system. For service, refer to Emission Control Systems.
- an evaporative emission (EVAP) control system. For service, refer to Evaporative Emissions System.

Some engines incorporate a fail-safe cooling system.

The engine, fuel system, ignition system, emissions system and exhaust system all affect exhaust emission levels and must be maintained according to the maintenance schedule. Refer to the scheduled Maintenance Guide.

Correct engine identification is required to order parts.

For complete vehicle and engine identification codes, refer to Vehicle Identification Codes.