Timing Drive Components - Hydraulic Chain Tensioner, LH

Timing Drive Components - Hydraulic Chain Tensioner, LH









Removal and Installation

1. Remove the intake manifold. For additional information, refer to Intake Manifold Service and Repair.

2. Remove the thermostat housing. For additional information, refer to Cooling System &/or Engine Block Heater.

3. Remove the hydraulic chain tensioner.
- To install, tighten to 44 Nm (32 lb-ft).

4. Remove and discard the washer.

5. To install, reverse the removal procedure.
- Install a new washer.