Cluster Finish Panel

Instrument Cluster Finish Panel









1. Remove the 2 screws and position the hood release handle aside.





2. Remove the 2 screws from the steering column opening trim panel.





3. Remove the steering column opening trim panel from the retainers and remove the panel.

4. Remove the steering column opening cover reinforcement.

1. Remove the 5 bolts.
- To install, tighten to 8 Nm (71 lb-in).

2. Remove the reinforcement.





5. Remove the instrument panel center finish panel. For additional information, refer to Instrument Cluster Finish Panel - Center Center Finish Panel.

6. Remove the 4 upper screws from the instrument cluster finish panel.





7. Remove the 2 lower screws from the instrument cluster finish panel.





8. Pull outward on the instrument cluster finish panel, disconnect the electrical connectors and remove the instrument cluster finish panel.





9. To install, reverse the removal procedure.