Idle Speed/Throttle Actuator - Electronic: Service and Repair

Idle Air Control (IAC) Valve - 4.0L

Throttle Body (TB) Cover









Idle Air Control (IAC) Valve









Removal and Installation

1. Remove the 3 bolts and the Throttle Body (TB) cover.
- To install, tighten to 8 Nm (71 lb-in).

2. Disconnect the Idle Air Control (IAC) valve electrical connector.

3. Remove the 2 bolts, the IAC valve and discard the gasket.
- To install, tighten to 10 Nm (89 lb-in).

4. NOTE: Install a new IAC valve gasket.

To install, reverse the removal procedure.