Ball Joint: Service and Repair

Ball Joint - Lower













Removal

1. Remove the wheel spindle. For additional information, refer to Wheel Spindle Service and Repair.

2. Remove and discard the lower ball joint snap ring.





3. Using the C-Frame and Screw Installer/Remover and Ball Joint Remover, remove the lower ball joint.





Installation

1. NOTICE: Do not damage the lower ball joint boot when installing the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover.

NOTE: Clean and inspect the lower arm ball joint bore for damage before installing a new ball joint.

NOTE: Make sure the new lower ball joint snap ring is fully seated.

Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, install the lower ball joint.





2. Install the wheel spindle. For additional information, refer to Wheel Spindle Service and Repair.