Pinpoint Test B: Shift Control Is Out of Correct Gear Relationship

External Controls

Pinpoint Tests

PINPOINT TEST B: SHIFT CONTROL IS OUT OF CORRECT GEAR RELATIONSHIP

-------------------------------------------------
B1 CHECK THE SELECTOR LEVER LINKAGE


- Ignition ON.
- Apply the brake pedal.
- Gain access to the selector lever linkage.
- Move the selector lever in all ranges.
- Observe all linkages during operation.
- Is the linkage damaged?

Yes
INSTALL new components. TEST the system for normal operation.

No
GO to B2.

-------------------------------------------------
B2 CHECK THE SELECTOR LEVER CABLE


- Check the selector lever cable and the bracket installation and tightness.
- Is the selector lever cable correctly installed and adjusted?

Yes
VERIFY the selector lever cable adjustment. REFER to Selector Lever Cable Adjustment Adjustments. ADJUST the selector lever cable if necessary. VERIFY the Transmission Range (TR) sensor for correct adjustment. REFER to Automatic Transmission/Transaxle &/or Transmission Control Systems. ADJUST the TR sensor if necessary. GO to B3 .

No
REPAIR as necessary. TEST the system for normal operation.

-------------------------------------------------
B3 CHECK THE SELECTOR LEVER LINKAGE/CABLE FOR CORRECT GEAR RELATIONSHIP


- Apply the brake pedal.
- Move the selector lever in all ranges.
- Does the indicator match the gear selection?

Yes
System OK. TEST the system for normal operation.

No
REFER to Selector Lever Cable Adjustment Adjustments. TEST the system for normal operation.

-------------------------------------------------