Exterior Mirror - Aero, Trailer Tow

Exterior Mirror - Aero, Trailer Tow

Removal and Installation

NOTE: Do not remove the exterior mirror assembly when repairing an individual part. Individual components can be installed without removing the exterior mirrors.

NOTE: Trailer tow mirror shown, Aero mirror similar.

1. Remove the exterior rear view mirror mounting hole cover.





2. Remove the front door trim panel. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

3. If equipped with power exterior mirrors, remove the front door speaker. For additional information, refer to Information and Entertainment Systems Testing and Inspection.

4. Remove the exterior rear view mirror.

1. If equipped, disconnect the electrical connector.

2. Remove the nuts.
- To install, tighten to 9 Nm (80 lb-in).

3. Remove the exterior rear view mirror.





5. To install, reverse the removal procedure.
- Tighten the exterior rear view mirror nuts in the sequence shown.