Seat Cushion - Rear, Bucket

Seat Cushion - Rear, Bucket

Disassembly and Assembly

NOTE: For parts identification and locations, refer to Seat - Exploded View, Rear, Bucket Seat - Exploded View, Rear, Bucket.

1. Remove the backrest. For additional information, refer to Seat Backrest - Rear, Bucket Seat Backrest - Rear, Bucket.

2. For RH seat, remove the seat track. For additional information, refer to Seat Track - Rear, Bucket Seat Track - Rear, Bucket.

3. For LH seat, remove the 4 nuts and seat pedestal.
- To install, tighten to 25 Nm (18 lb-ft).

4. Remove the cushion cover. For additional information, refer to Seat Cushion Cover - Rear, Bucket Seat Cushion Cover - Rear, Bucket.

5. Remove the cushion foam pad.

6. Remove the bolt and safety belt buckle.
- Note safety belt buckle position for correct installation.

- To install, tighten to 40 Nm (30 lb-ft).

7. For LH seat, remove the 2 bolts and recliner.
- To install, tighten to 48 Nm (35 lb-ft).

8. To assemble, reverse the disassembly procedure.