Seat Latch Striker - Rear, Bucket

Seat Latch Striker - Rear, Bucket

NOTE: RH shown, LH similar.











Removal and Installation

NOTE: RH shown, LH similar.

1. Insert an appropriate tool into the slot and release the detachable safety belt anchor from the seat.





2. Remove the seat.
- Pull the seat latch release handle, slide the seat to the right and disengage from the latch striker plate.





3. Remove the 4 bolts and seat latch striker.
- To install, tighten to 90 Nm (66 lb-ft).

4. To install, reverse the removal procedure.