Seat Armrest - Front

Seat Armrest - Front

Removal and Installation

NOTE: For parts identification and locations, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Release the hook-and-loop at the rear of the armrest cover and partially invert to access the armrest bolt.

2. Remove the armrest bolt and discard the crown washer.
- For installation, install a new crown washer.

- To install, tighten to 35 Nm (26 lb-ft).

3. Remove the armrest and shim.
- To install, position the shim to the armrest stop post.

4. To install, reverse the removal procedure.