Telematics Module

Telematics Module









Removal

1. Turn the ignition to OFF.

2. Remove the engine cover. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

3. Disconnect the telematics module electrical connector.

4. Remove the 2 screws and the telematics module.

Installation

1. Position the telematics module and install the 2 screws.
- Connect the electrical connector.

2. Install the engine cover. For additional information, refer to Interior Trim and Ornamentation Service and Repair.

3. Initialize the telematics module.

1. Wait 5 minutes after the modem-antenna is installed.

2. Turn the ignition to RUN.

3. Wait 10 seconds.

4. Start the vehicle and run the engine for 30 seconds.

5. Turn the ignition to OFF.