Extension Housing Seal

Extension Housing Seal









Extension Housing Seal









Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the driveshaft. For additional information, refer to Driveshaft Removal and Replacement.

3. Using the Transmission Fluid Seal Remover and Slide Hammer, remove the extension housing seal.





Installation

1. NOTE: When installing the new seal, make sure that the drain hole in the seal is in the 6 o'clock position.

Using the Transmission Extension Housing Oil Seal Installer, install a new extension housing seal.





2. Install the driveshaft. For additional information, refer to Driveshaft Removal and Replacement.

3. Check the transmission fluid level, add transmission fluid as necessary.
- Verify for correct operation.

- Check for leaks.