Exterior Mirror Glass - Aero

Exterior Mirror Glass - Aero

Removal

1. Position the exterior rear view mirror glass in the full down position.





2. Locate the notch at the inside top corner of the exterior mirror glass.





3. Release the exterior mirror glass in the following sequence.

1. Insert a long flat-blade screwdriver in the notch.

2. Push the screwdriver into the notch until the glass is released.

4. Remove the exterior mirror glass.

Installation

1. Position the exterior mirror glass on the mirror motor.

2. WARNING: Place a shop towel between the hands and the exterior mirror glass for protection in case of glass breakage during mirror service. Failure to follow this instruction may result in serious personal injury.

Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the mirror glass in place until it is fully seated.