Computers and Control Systems

Engine Control Components - Exploded View, 3.5L GTDI









Camshaft Position (CMP) Sensor

NOTE: LH shown, RH similar.










Crankshaft Position (CKP) Sensor

NOTE: It is necessary to remove the LH turbo charger to access the Crankshaft Position (CKP) sensor. For additional information, refer to Fuel Delivery and Air Induction.

NOTE: After installing the Crankshaft Position (CKP) sensor, use the scan tool to perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.










Cylinder Head Temperature (CHT) Sensor

NOTE: It is necessary to remove the RH fender splash shield to access the Cylinder Head Temperature (CHT) sensor. For additional information, refer to Body and Frame.










Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor (CMS)

NOTE: If necessary, lubricate the Heated Oxygen Sensor (HO2S) and/or Catalyst Monitor Sensor (CMS) with penetrating and lock lubricant to assist in removal.

NOTE: Apply anti-seize to the threads of the HO2S (Heated Oxygen Sensor) and/or CMS (Catalyst Monitor Sensor) prior to installing.

NOTE: The correct torque wrench setting must be calculated when using the Exhaust Gas Oxygen Sensor Socket to install the HO2S (Heated Oxygen Sensor) and/or CMS (Catalyst Monitor Sensor).










Knock Sensor (KS)

NOTE: It is necessary to remove the lower intake manifold to access the Knock Sensor (KS). For additional information, refer to Engine.

NOTE: LH cylinder head removed in graphic for clarity.










Variable Camshaft Timing (VCT) Oil Control Solenoid

NOTE: It is necessary to remove the RH or LH valve cover to access the Variable Camshaft Timing (VCT) oil control solenoid. For additional information, refer to Engine.

NOTE: Position the VCT (Variable Camshaft Timing) oil control solenoid and tighten the bolts in 2 stages.
- Stage 1: Tighten to 8 Nm (71 lb-in).
- Stage 2: Tighten an additional 20 degrees.

NOTE: LH shown, RH similar.










1. Refer to the procedures and/or exploded views for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.