Fuel Tank Pressure Sensor: Service and Repair

Fuel Tank Pressure Sensor









Removal and Installation

WARNING: Always disconnect the battery ground cable at the battery when working on an evaporative emission (EVAP) system or fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

1. Remove the fuel tank.

2. Disconnect the 2 Fuel Tank Pressure (FTP) sensor and vapor tube assembly-to-fuel tank vent valve quick connect couplings.

3. Disconnect the FTP (Fuel Tank Pressure) sensor and vapor tube assembly-to-fuel pump module quick connect coupling.

4. Remove the FTP (Fuel Tank Pressure) sensor and vapor tube assembly from the fuel tank.

5. To install, reverse the removal procedure.
- Carry out the Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test Testing and Inspection.