Turbo Boost Sensor: Service and Repair

Turbocharger Boost Pressure (TCBP) / Charge Air Cooler Temperature (CACT) Sensor - 3.5L GTDI









Removal

NOTE: Turbocharger Boost Pressure (TCBP) / Charge Air Cooler Temperature (CACT) sensor and the Manifold Absolute Pressure (MAP) /Intake Air Temperature 2 (IAT2) sensor are not interchangeable.

1. Remove the ACL (Air Cleaner) outlet tube.

2. Disconnect the Turbocharger Boost Pressure (TCBP) /Charge Air Cooler Temperature (CACT) sensor electrical connector.

3. Remove the 2 screws and the TCBP (Turbocharger Boost Pressure) /CACT (Charge Air Cooler Temperature) sensor.

Installation

1. Install the TCBP (Turbocharger Boost Pressure) /CACT (Charge Air Cooler Temperature) sensor and the 2 screws.
- Tighten to 3 Nm (27 lb-in).


2. Connect the TCBP (Turbocharger Boost Pressure) /CACT (Charge Air Cooler Temperature) sensor electrical connector.

3. Install the ACL (Air Cleaner) outlet tube.