Front Door Window Glass Weatherstrip: Service and Repair

Door Glass Top Run - Front

Removal and Installation

NOTE: The front window motor must be de-initialized, then initialized whenever the LH front or RH front window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run.

1. Remove the front door window glass. For additional information, refer to Window Glass- Front Door Window Glass - Front Door.

2. Remove the exterior rear view mirror.

3. Remove the front door outer belt moulding.

4. Remove the front door glass top run.
- Remove the front door glass top run through the top opening of the front door.


5. To install, reverse the removal procedure.
- Initialize the front window motor. For additional information, refer to Window Motor Initialization .