150000 MI or 240000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Perform multi-point inspection (recommended)
    Universal Joint, Drive/Propeller Shaft
      Inspect rear axle and U-joints; lubricate if equiped with grease fittings (AWD vehicles).
    Tie Rod End
    Tie Rod Boot
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling system strength and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
Replace
    Oil Filter, Engine
      Replace engine oil filter.
    Fluid Filter - A/T
    Fluid - Differential
      Change rear axle fluid.
    Fluid - A/T
      Change automatic transmission fluid and filter.
    Filters
      Replace climate-controlled (heated and cooled) seat filter (if equipped).
    Engine Oil
      Replace engine oil.
    Drive Belt
      Replace accessory drive belt(s) if not replaced within the last 100,000 miles (160,000 km).
    Coolant
      Change engine coolant. Initial replacement at six years or 105,000 miles (168,000 km), then every three years or 45,000 miles (72,000 km).
    Air Filter Element
      Replace engine air filter.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.