105000 MI or 168000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Perform multi-point inspection (recommended)
    Universal Joint, Drive/Propeller Shaft
      Inspect rear axle and U-joints; lubricate if equiped with grease fittings (AWD vehicles).
    Tie Rod End
    Tie Rod Boot
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with dipstick).
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive Belt
      Inspect accessory drive belt(s). If not replaced, inspect every 15,000 miles (24,000 km).
    Cooling System
      Inspect engine cooling system strength and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
Replace
    Oil Filter, Engine
      Replace engine oil filter.
    Engine Oil
      Replace engine oil.
    Coolant
      Change engine coolant. Initial replacement at six years or 105,000 miles (168,000 km), then every three years or 45,000 miles (72,000 km).
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.