100000 MI or 160000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Perform multi-point inspection (recommended).
    Universal Joint, Drive/Propeller Shaft
      Inspect front axle and U-joints. Lubricate if equipped with grease fittings (4WD vehicles).
    Tie Rod End
    Tie Rod Boot
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints. Lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with dipstick).
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive Belt
      Inspect accessory drive belt(s). After initial inspection, inspect every other oil change until replaced.
    Cooling System
      Inspect engine cooling strength and hoses.
    Constant Velocity Joint Boot
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake.
    Ball Joint
Replace
    Spark Plug
      Replace spark plugs, if using normal condition.
    Oil Filter, Engine
    Engine Oil
      Change engine oil and filter if using special operating conditions T, I, D, O.
    Coolant
      Change engine coolant. Initial replacement at six years or 100,000 miles (160,000 km), then every three years or 50,000 miles (80,000 km).
    Air Filter Element
      Replace engine air filter, if using special operating conditions I, D, O.
Rotate
    Tires
      If using special operating conditions T, I, D, O