125000 MI or 200000 KM
InspectWheels
Inspect wheels and related components for abnormal noise, wear, looseness or drag.
Vehicle
Perform multi-point inspection (recommended).
Universal Joint, Drive/Propeller Shaft
Inspect front axle and U-joints. Lubricate if equipped with grease fittings (4WD vehicles).
Tie Rod End
Tie Rod Boot
Steering and Suspension
Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints. Lubricate if equipped with grease fittings.
Fluid - A/T
Inspect automatic transmission fluid level (if equipped with dipstick).
Exhaust System
Inspect exhaust system and heat shields.
Cooling System
Inspect engine cooling strength and hoses.
Constant Velocity Joint Boot
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake.
Ball Joint
Replace
Oil Filter, Engine
Engine Oil
Change engine oil and filter if using special operating conditions T, I, D, O.
Air Filter Element
Replace engine air filter, if using special operating conditions I, D, O.
Rotate
Tires
If using special operating conditions T, I, D, O