150000 MI or 240000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Perform multi-point inspection (recommended).
    Universal Joint, Drive/Propeller Shaft
      Inspect front axle and U-joints. Lubricate if equipped with grease fittings (4WD vehicles).
    Tie Rod End
    Tie Rod Boot
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints. Lubricate if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling strength and hoses.
    Constant Velocity Joint Boot
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake.
    Ball Joint
Replace
    Wheel Bearing
      Replace front wheel bearing grease and grease seals if non-sealed bearings are used (2WD vehicles), if using special operating condition O.
    Oil Filter, Engine
    Fluid Filter - A/T
    Fluid - A/T
      Change automatic transmission fluid and filter.
    Filters
      Replace climate-controlled (heated and cooled) seat filter (if equipped).
    Engine Oil
      Change engine oil and filter if using special operating conditions T, I, D, O.
    Drive Belt
      Replace accessory drive belt(s) if not replaced within the last 100,000 miles (160,000 km).
    Air Filter Element
      Replace engine air filter, if using normal condition. Replace engine air filter, if using special operating conditions I, D, O.
Rotate
    Tires
      If using special operating conditions T, I, D, O