45000 MI or 72000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness or drag. If using Special Operating Conditions: T, I, D, O. Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Multi-point Inspection
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate U-joints. If using Special Operating Cconditions: T, I, D, O.
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints. Lubricate if equipped with grease fittings. Lubricate control arm and steering ball joints if equipped with grease fittings. If using Special Operating Conditions: I, O.
    Fluid - A/T
      Inspect automatic transmission fluid level.
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive Axles, Bearings and Joints
      Inspect front axle and U-joints. Lubricate if equipped with grease fittings.
    Cooling System
      Inspect engine cooling system strength and hoses.
    Coolant
      Inspect engine and secondary cooling system concentration (freeze-point protection), additive (corrosion inhibitor) strength, coolant level and hoses. Every 15,000 miles (24,000 kilometers), 600 engine hours or as indicated by the information display.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake. Inspect brake system. If using Special Operating Conditions: I.
    Air Filter Element
      Engine Air Filter
Replace
    Fuel Filter
      Replace engine and frame mounted fuel filters.
    Engine Oil
      Change engine oil and filter. Change engine oil and filter. If using Special Operating Conditions: T, I, D, O.
    Air Filter Element
      Replace air inlet foam filter.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth. Vehicles equipped with dual rear wheels should rotate the front wheels when specified; rear wheels only if unusual wear is noted. Rotate tires, inspect tires for wear and measure tread depth. Vehicles equipped with dual rear wheels should rotate the front wheels when specified; rear wheels only if unusual wear is noted. If using Special Conditions: T, I, D, O.