Throttle Position Sensor: Specifications
IDLE SPEEDThe idle speed is computer controlled and a scan tool is required for adjustment. Refer to ADJUSTMENT PROCEDURES.
TORQUE VALUES
Air Bypass Valve to Throttle Body 6-8.5 lb. ft. (8-11.5 N-m)
Air Supply Tube Clamps 15-23 lb. in. (1.7-2.6 N-m)`
Accelerator Cable Bracket 10-15 lb. ft. (13.5-20.5 N-m)
EGR Tube 18-28 lb. ft. (25-38 N-m)
Fuel Injector Manifold to Fuel Charging Assembly 15-22 lb. ft. (20-30 N-m)
Fuel Pressure Regulator to Injector Manifold 26-40 lb. in. (3-4.5 N-m)
Fuel Pressure Relief Valve 4.1-7 lb. in. (5.5-9.5 N-m)
Fuel Pressure Relief Cap 4-6 lb. in. (0.5-0.7 N-m)
Lower Intake Manifold to Head 15-22 lb. ft. (20-30 N-m)
Throttle Body to Upper Intake Manifold 15-22 lb. ft. (20-30 N-m)
Throttle Position Sensor to Throttle Body 25-34 lb. in. (2.8-3.8 N-m)
Throttle Position Sensor Electrical Connector to Throttle Body 30-44 lb. in. (3.5-5.0 N-m)
Upper Intake Manifold to Lower Intake Manifold Bolts 15-22 lb. ft. (20-30 N-m)
Upper Intake Manifold Vacuum Tree 12-18 lb. ft. (16-24 N-m)
Water Bypass Line 12-20 lb. in. (1.4-2.2 N-m)