Ignition Coil: Service and Repair

Ignition Coil Removal:

REMOVAL
1. Disconnect negative battery cable.

Ignition Coil Wire:

2. Disconnect high tension coil wire from the ignition coil.

Igntion Coil Electrical Connector:

3. Disconnect electrical connector from ignition coil.
4. Remove the nuts, screws and bracket from ignition coil.
5. Remove the ignition coil.

INSTALLATION
1. Position the ignition coil and install the screws, bracket and nuts.
2. Connect electrical connector.
3. Connect the high tension coil wire.
4. Connect negative battery wire.