Instrument Cluster - Finish Panel

Removal and Installation
1. Remove two screws retaining instrument panel finish panel. Remove instrument panel finish panel.
2. Disconnect time only clock and heated rear defrost switch.
3. Remove RH instrument panel upper moulding and LH instrument panel moulding from instrument panel by pulling away from instrument panel and snapping out of retainers.
4. Remove radio chassis.
5. Remove eight screws retaining instrument panel finish panel to instrument panel.
6. Pull instrument panel finish panel away from instrument panel while unsnapping RH and LH upper corner retainers and disconnect wiring. Remove instrument panel finish panel from vehicle.
7. To install, reverse Removal procedure.
8. Verify air bag warning indicator operation.