Crankshaft Position Sensor

Connector: C129 is at the Crankshaft Position Sensor, it is a Gray 4 terminal connector.

There is no connector view for the C129 given. Refer to the wiring diagram. Electrical Diagrams

There are 2 inline connectors between the sensor and the Powertrain Control Module (of the 4 circuits, they contain 3: 727, 728 & 69):

C151:

The automatic transaxle equipped vehicle shows an inline connector C151.

In-Line Connector Faces - C126:

The manual transaxle equipped vehicle shows an inline connector C126.

Crankshaft Position (CKP) Harness Connector:

This connector shows a simplified two pin CKP harness connector.
The test pin references shown on the connector refer to the Break Out Box, they also happen to be the terminals on the PCM.