Rear

REMOVAL
1. Remove the hub/wheel bearing.
2. Use Push-Puller set D80L-927-A, Bearing Pulling Attachment D84L-1123-A, King Pin Seal Installer T86T-3110-AH, and Protector D80L-625-A to remove the wheel sensor rotor. Discard the old part.

INSTALLATION

CAUTION: Install the new sensor rotor with the chamfered edge toward the wheel hub.

1. Use Rear Sensor Ring Replacer T88P-20202-B and a hydraulic press to press in a new rear wheel sensor rotor.
2. Reinstall the hub/wheel bearing.