Air Cleaner Housing: Service and Repair

Intake Air Components:

REMOVAL AND INSTALLATION
1. Loosen engine air cleaner tube clamp at Mass Air Flow (MAF) sensor.
2. Remove air cleaner outlet tube from MAF sensor.
3. Disconnect engine control sensor wiring from MAF sensor. Disconnect engine control sensor wiring from intake air temperature sensor.
4. Remove air cleaner element.
5. Remove engine air cleaner retaining nuts and engine air cleaner.
6. To install, reverse removal procedure. Tighten engine air cleaner retaining nuts to 8.0-11.5 Nm (71-102 lb in). Tighten engine air cleaner tube clamp to 3.4-4.6 Nm (30-41 lb in).