Technician Safety Information

CAUTION:

- Always wear appropriate eye protection.
- Disconnect negative battery cable before starting any service work.
- Use caution when working near catalytic converters, catalytic converter temperatures can exceed 1000°F.

IGNITION SYSTEMS
- Ignition systems present a shock hazard, exercise care when performing spark test and always use non-conductive ignition wire pliers.

FUEL SYSTEM

NOTE: When servicing the fuel system use the following precautions:

- Set up a "Caution: Flammable" sign in the workshop area.
- Be sure shop is equipped with the proper fire extinguisher.

NOTE: If available, use system schrader type valve to relieve pressure.

- Place a suitable container under connection to be opened.
- Place a shop cloth over fittings to be disconnected. This will catch any pressurized spray when the lines are opened.
- Slowly open connection, allow pressure to escape, and catch spilled fuel in container.
- After disconnecting lines or hoses, plug all fittings.
- Put any drained fuel in an explosive-proof container with a secure fitting lid, labeled Gasoline.