Connecting Rod

DIMENSIONS
Bend:
Limit 0.04 mm (0.0016 inch) per 100 mm (3.94 inch)
Piston Pin:
Bore Diameter 19.948-19.961 mm (1.8897-1.8904 inch)
Interference Fit [1] 0.00-0.026 mm (0.00000-0.00102 inch)
Side Clearance:
Standard 0.110-0.262 mm (0.0043-0.0103 inch)
Limit 0.30 mm (0.012 inch)
Twist:
Limit 0.04 mm (0.0016 inch) per 100 mm (3.94 inch)

TIGHTENING SEQUENCE/SPECIFICATIONS
Tighten nuts evenly, in two steps.
Step 1 15-17 Nm (11-13 ft. lbs.)
Step 2 29-34 Nm (22-25 ft. lbs.)

[1] The difference between piston pin Outer Diameter (OD) and the connecting rod Inner Diameter (ID), with the piston pin being the larger of the two. A pressure of 4.9-4.7 N (1,100-3,300 lbs.) should be needed to install the pin into the connecting rod.