Preliminary Inspection

1. Wheel alignment should be checked only after the following conditions have been met:
^ All excessive mud, dirt and road deposit accumulation have been removed from the chassis and underbody.
^ Inspection has ruled out the possibility of worn or damaged suspension components which need to be replaced.
^ Heavy cargo items have been removed and vehicle attitude is correct.
^ Spare tire, jack and jack handle are in the correct position.
^ Front seats are in the rear-most position.
^ Tire condition and inflation (cold) have been verified to be uniform and correct.
^ The fuel tank, oil pan and radiator are filled to specification.
2. If necessary, refer to Tools and Equipment for installation and required tool information. Tools and Equipment