Removal and Installation

REMOVAL
1. Remove A/C evaporator housing assembly.Service and Repair
2. Disconnect vacuum harness from A/C evaporator housing and position aside.
3. Remove four heater core cover retaining screws. Remove heater core cover from A/C evaporator housing.
4. Remove heater dash panel seal from heater core tubes.

INSTALLATION
1. Install new heater core case seal.
2. Install heater core in A/C evaporator housing.
3. Install heater dash panel seal on heater core tubes.
4. Position heater core cover on A/C evaporator housing. Install four retaining screws.
5. Connect vacuum harness to A/C evaporator housing.
6. Install A/C evaporator housing.