| Main bearing journal diameter | | 57.98 - 58.0 Millimeter (mm) |
| Main bearing journal end float | | 0.09 - 0.26 Millimeter (mm) |
| Big-end bearing journal dia. | | 46.89 - 46.91 mm |
| Out of round limit | | 0.008 Millimeter (mm) |
| Taper limit | | 0.008 per 25.4 Millimeter (mm) |
| Journal runout limit | | 0.05 Millimeter (mm) |
| Runout of bearings 2, 3, and 4 crankshaft end play | | 0.100 - 0.300 Millimeter (mm) |
| Surface finish (RMS) micro | | 0.3 Millimeter (mm) |
| Clearance to crankshaft | | 0.020 - 0.065 Millimeter (mm) |
| Thrust bearing journal length | | 28.825 - 28.854 mm |
| Connecting rod journal diameter | | 43.89 - 43.91 Millimeter (mm) |
| Out of round limit | | 0.008 Millimeter (mm) |
| Taper limit | | 0.008 per 25.4 Millimeter (mm) |
| Surface limit (RMS) micro | | 0.6 Rear 0.9 Front Millimeter (mm) |
| Main bearing thrust face surface finish (RMS) micro | | 0.6 mm |
| Rear micro | | 0.9 mm |
| Front runout limit (TIR) | | 0.025 Millimeter (mm) |
| Crankshaft end play | | 0.100 - 0.300 Millimeter (mm) |
| Main Bearing Cap Bolts | | 63 Foot Pound-Force (ft.lb) |
| Large End Bearing Cap Bolts | Stage 1 | 26 Foot Pound-Force (ft.lb) |
| Large End Bearing Cap Bolts | Stage 2 | 90 Degrees |