Connecting Rod Bearing
General SpecificationsClearance to Crankshaft
Desired 0.027 - 0.069 mm (0.0010629 - 0.0027165 inch)
Allowable 0.027 - 0.069 mm (0.0010629 - 0.0027165 inch)
Bearing Wall Thickness (Std.) f 2.442 - 2.453 mm (0.096 - 0.097 inch)
Main Bearings Clearance to Crankshaft
Desired 0.025 - 0.044 mm (0.001 - 0.002 inch)
Allowable 0.025 - 0.050 mm (0.00098 - 0.00197 inch)
Bearing Wall Thickness (Std.) f 1.919 - 1.925 mm (0.0756 - 0.0757 inch)
f Cylinder Bore Diameter measured at 31 mm (1.24 inch) from top of block
Red-90.200 - 90.210
Blue-90.210 - 90.220
Yellow-90.220 - 90.230