Connecting Rod, Engine
| Pin Bore Diameter | 0.86661 - 0.86708 Inch (in) | |
| Crankshaft Bearing Bore Diameter | 2.23881 - 2.23960 Inch (in) | |
| Length (Center-to-Center) | 5.933 Inch (in) | |
| Alignment (Bore-To-Bore Max. Diff.) Pin bore and crank bearing bore must be parallel and in same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | Twist | 0.00197 per 0.9843 Inch (in) |
| Bend | 0.00150 per 0.9843 Inch (in) | |
| Side Clearance (Assembled to Crank) | Standard | 0.005 - 0.019 Inch (in) |
| Service Limit | 0.01969 Inch (in) Max. |