Vehicles Built From: 08/2000
DISASSEMBLYAll vehicles
1. Lift the rear seat cushion.
2. Detach the center rear safety belt lower anchor.
3-door and Wagon
3. Detach both outer safety belt lower anchors.
4. Detach the safety belt webbing from the top of the backrest.
^ Feed the safety belt webbing through the elastic loops.
All vehicles
5. Remove the rear seat backrest.
6. Remove the head restraints.
7. Remove the head restraint guides.
1. Using a suitable screwdriver, depress the locking tang.
2. Lift the head restraint guide.
8. Remove the rear seat backrest carpet.
9. Detach the backrest cover retaining strip.
3-door and wagon
10. Remove the backrest release button surround (if equipped).
11. Detach the backrest cover from the backrest release button (if equipped).
12. Detach the foam pad from the backrest release button (if equipped).
13. Lock off the backrest latch.
NOTE: Locking off the backrest latch allows the safety belt to be moved when the backrest is in its normal upright position.
All vehicles
14. Install the safety belt webbing retainer.
NOTE: The safety belt webbing retainer is supplied with new safety belts. Do not use any other retaining method.
15. Detach the center rear safety belt guide.
1. Move the safety belt webbing to access the retainers.
2. Drill out the rivets.
16. Remove the center safety belt guide.
17. Detach the center rear safety belt webbing from the seat cover and foam pad.
18. Remove the seat cover and foam pad.
19. Cut the seat cover from the foam pad.
^ Remove the twelve hog rings.
ASSEMBLY
1. To assemble, reverse the disassembly procedure.