Vehicles Built Up To: 08/2000
DISASSEMBLY1. Lift the rear seat cushion.
2. Detach the center rear safety belt lower anchor.
3. Remove the rear seat backrest.
4. Remove the backrest release button surround (if equipped).
5. Remove the rear seat backrest carpet.
6. Detach the backrest cover retaining strip.
7. Detach the backrest cover from the backrest release button (if equipped).
8. Detach the foam pad from the backrest release button (if equipped).
9. Lock off the backrest latch.
NOTE: Locking off the backrest latch allows the safety belt to be moved when the backrest is in its normal upright position.
10. Insert the safety belt webbing retainer.
NOTE: The safety belt webbing retainer is supplied with new safety belts. Do not use any other retaining method.
11. Detach the center rear safety belt guide.
1. Move the webbing to access the retainers.
2. Drill out the rivets.
12. Remove the center safety belt guide.
13. Detach the center rear safety belt webbing from the seat cover and foam pad.
14. Remove the seat cover and foam pad.
15. Remove the seat cover from the foam pad.
^ Remove the twelve hog rings.
ASSEMBLY
1. To assemble, reverse the disassembly procedure.