Vehicle with: MT285
Transaxle Draining and Filling1. Raise and support the vehicle.
MT285 Manual Transmission:
2. Remove the transaxle drain plug. Allow the oil to drain into a suitable container. Discard the seal.
MT285 Manual Transmission:
3. NOTE: Install a new drain plug seal.
NOTE: Clean the drain plug threads.
Install the drain plug.
MT285 Manual Transmission:
4. Remove the transaxle filler plug.
5. CAUTION: The total amount of oil is 1.7L. In case of transaxle refill, fill the transaxle with approximately 1.5L -1.6L.
With the vehicle on a level surface, fill the transaxle to below the lower edge of the filler plug bore with manual transmission fluid.
MT285 Manual Transmission:
6. Install the transaxle filler plug.
7. Lower the vehicle.