Differential

Differential





Disassembly





1. Install the special tools.
1. Install the thrust element.
2. Insert the tapered insert
3. Install the basic tool.





2. Install the special tools.
- Install the half shells of the insert.
- Install the half shells to the basic tool.





3. Using the special tools, preload the bearing and remove it.
4. Repeat sub-operations to for the other taper roller bearing.





5. Remove the trigger wheel.





6. Remove the gear.
- Unscrew the bolts.
- Remove the gear by tapping lightly on it.

Assembly

1. NOTE: Do not oil taper roller bearings, which are to be used again. New taper roller bearings can be installed without any treatment.

Carefully clean and check all parts and lubricate them with Manual transmission fluid.





2. Install the gear to the differential.
- Tighten the bolts, working diagonally.





3. NOTE: The trigger wheel must engage in the housing recess.

Install the bearings.
1. Install the trigger wheel.
2. Using the special tools, install the bearings.