Connecting Rod, Engine

Connecting rod bearings clearance to crankshaft 0.020 - 0.065 mm
Bearing wall thickness (std.) 1.476 - 1.488 mm
Clearance of crankshaft without cylinder head
Desired 0.0457 - 0.0660 mm
Allowable 0.0461 - 0.0859 mm
Clearance of crankshaft with cylinder head
Desired 0.0279 - 0.0483 mm
Allowable 0.0276 - 0.0674 mm
Bearing wall thickness 2.117 - 2.129 mm
Connecting rod piston pin bore diameter 20.570 - 20.610 mm
Crankshaft bearing bore diameter 46.89 - 46.91 mm
Out-of-round limit-piston pin bore 0.008 mm
Taper limit piston pin bore 0.0038 mm/25.4 mm
Length (center to center) 131.905 - 131.975 mm
Out-of-round-limit-bearing bore 0.010 mm
Taper limit-bearing bore 0.010 mm
Alignment bore-to-bore (max. differential)
Twist 0.05 mm
Bend 0.038 mm
Side clearance (assembled to crank)
standard 0.092-0.268 mm
service limit 0.356 mm
Connecting rod bolts 38 Nm (28 ft. lbs.)