Crankshaft Main Bearing
CrankshaftMain bearing journal diameter 57.98 - 58.0 mm
Journal runout limit (runout of bearing 2, 3, and 4) 0.05 mm
Thrust bearing journal length 28.825 - 28.854 mm
Main bearing thrust face surface finish (RMS) micro 0.6 mm
Main bearing thrust trace surface finish (RMS) rear micro 0.9 mm
Main bearing thrust face surface finish (RMS) front runout limit 0.025 mm
Main bearing bolts 99 Nm (73 ft. lbs.)
Rear crankshaft oil seal retainer 25 Nm (18 ft. lbs.)
Big end bearing cap nuts 38 Nm (28 ft. lbs.)