Crankshaft, Engine

Crankshaft
Out - of round limit 0.008 mm
Taper limit 0.008 mm per 25.4 (1)
Journal runout limit (runout of bearing 2, 3, and 4) 0.05 mm
Crankshaft end play 0.100 - 0.300 mm
Surface finish (RMS) micro 0.3 mm
Clearance to crankshaft 0.020 - 0.065 mm
Thrust bearing journal length 28.825 - 28.854 mm
Connecting rod journal length 28.825 - 28.854 mm
Out - of - round limit 0.008 mm
Taper limit 0.008 per 25.4 mm
Surface limit (RMS) micro 0.6 mm rear
Surface limit (RMS) micro 0.9 mm front
Runout limit (T.I.R.) 0.180 mm
Flywheel ring (gear lateral runout (T.I.R.) manual transmission 1.5 mm
Crankshaft end play 0.100 - 0.300 mm

Main bearing bolts 99 Nm (73 ft. lbs.)
Rear crankshaft oil seal retainer 25 Nm (18 ft. lbs.)
Big end bearing cap nuts 38 Nm (28 ft. lbs.)